LATHES, METALWORKING
| ENGINE
& TOOLROOM |
|
 90"
x 52'4" (628"), "Bertram" (Niles), heavy-duty, twin-carriage engine
lathe. SOLD |
|
 1250
mm (50"), "Heyligenstaedt", CNC, twin-disk & ring lathe Ref:
1895 SOLD |
|
 116"
swing in gap, "CMC", sliding gap, 76" faceplate, Price: $7,500
USD Ref: 1868 |
|
 72"
x 48' (576"), "Craven", twin carriage
Picture 2 Picture 3 Picture
4 Picture 5 SOLD |
|
 51"
x 228", "Crawford-Swift", CNC roll lathe Ref:
9109 SOLD |
|
39" x 37' (444"), "VDF" (German), twin carriage, inch/mm,
excellent bed, 2 steadies, 25 HP @ 710 RPM, Price: Call Ref:
9107 |
|
 34½"
x 120", "Monarch", copy tracer, twin Carriage Ref:
9118 |
|
 32"/60"
x 162", "LeBLOND", sliding gap lathe SOLD |
|
 31½"
x 196-7/8", "SARO", mod. SPA, NEW, Price: Call |
|
 30"
(41" Gap) x 30', "Clover" (Italy), long lathe Ref:
2057 Picture 2 Picture
3 Picture 4 |
|
 28"
x 96", "Bertram", engine lathe, missing chuck, Price: $3,950 USD Ref:
1862 |
|
24" x 72", "VDF" (Germany), "Unicop", clean, 3-jaw (2-piece),
3-pt.
steady, 4-way toolpost, live center, Price $4,600 USD
Ref: 9140 SOLD |
|
 23½"
x 202", "American", "PACEMAKER" copy lathe Ref:
9119 |
|
22" x 84", "TOS" (Czech.) mod. SN55, equipped, 2.5" spindle bore,
2 chucks, heavy duty, inch & metric
Ref: N1250 SOLD |
|
20" x 72", "Monarch", Series 60, 16 speeds 28 to 1200 RPM,
hardened ways, 4 Jaw chuck, 10" 3 jaw, steady rest. Ref:
9154 SOLD |
|
21" x 64", "WMW Niles" (German), 3" bore, 30 HP,
1800 RPM, 16" 3-jaw, steady, Price: $9,750
USD Ref: C1582 |
|
 20"
x 72", "Monarch", Price: $9,800 USD Ref:
1643 |
|
 20"
x 31.9", CNC, "Johnford", model TC-35 |
|
19" x 80", "Rockford", "Economy" (USA), 1-3/4" spindle bore, chucks,
steadies, driver,
extra jaws, taper attach., hardened bed, 220V., well built, Price: $6,500
USD Ref: P0122 |
|
19" (22") x 60", "Ikegai" (Jap.), 2-1/4" spindle bore, L-3000,
7.5HP, 550/440V, 1975,
coolant, 3 & 4 jaw chucks, numerical readout on crosslide, Price: $6,450
USD Ref: N0092 |
|
| 18.5"
x 54", "Monarch", 4-Jaw, toolpost,
good solid runner, Price: Call
Ref: N1089 |
|
16.7" x 62", "Monarch", toolroom, var. speed, 1960's, needs
speed controller
but a super good quality lathe direct from Bombardier
Aerospace, Price: Call Ref:
P1213 |
|
 16.5"x
40", "Bridgeport", "Easy-Path", CNC toolroom lathe, 1996
SOLD |
|
16" x 60", "TOS", mod. SN40C, swing in gap: 23.5", length of gap
from spindle nose
12.25", 3 Jaw chuck, steady rest, 550V, rapid traverse, Price: $5,500 USD Ref:
9244 SOLD |
|
 16"
x 60", "South Bend", 575V, S/N: 10653HKR14, Price: $2,975 USD Ref:
P0123 SOLD |
|
 16"
x 52 ", "Harrison" CNC Alpha 400 combination lathe SOLD |
|
16" x 36", "South Bend", mod. 117C, 220V/3ph, 3HP, 1950's, S/N:
19HKR7,
Steady rest, 3 & 4-Jaw chucks, thread dial, mike stop, Price: $2,750
USD Ref: P0095 |
|
15½" x 42", "Sebastian", 3 jaw chuck, thread dial, 550V,
spindle bore
1-1/4", swing / crosslide 9-1/2", tail taper no. 3, 2-V-ways, S/N: B-24306,
Price: $3,350 USD Ref: P1212 SOLD |
|
14"(27"Gap) x 48", "Stanley", gap piece, chuck, steady, 2 pt.
follower, large dia. short lathe, Price: $3,750 USD Ref:
P0073 |
|
14" x 40", Graziano SAG 40
Excellent condition call for price |
14" x 40", CNC, "Standard Modern", 1997, Series
12083, less than 100 hours of use, Price: Call |
|
14" x 38", Lathe TOS (Czech), inch-metric, 39 threads from 2-80 tpi, 24
metric threads
from .25 to 7 1200 rpm, c.w. 8" 3 jaw chuck, steady rest, follower
rest, taper turning attachment, change gears, thread
dial (fixer-upper), bed broken out, Price:
Call Ref: N0717 |
|
14" x 35", "TOS", mod. SN32, 550V, 1997, S/N: 573207940132,
inch-metric threading, Price: $9,350 USD Ref:
9195 Picture
2 |
|
14" x 30", "Hendey", mod. 1, 30-1142 RPM, 220/440/3ph,
S/N: 37513H482, 3 jaw chuck, Price: $2,875 USD Ref:
C1550 SOLD |
|
14" x 24", "Harrison", gap, taper turning attach.,
cabinet base, a top quality British machine Ref:
P1210 |
|
13" x 42", "Dean Smith & Grace", 1959, 550V, 3-jaw
chuck, Type 13, 1-7/8"
bore, dial indicator, taper attachment, good condition Price: $6,500 USD |
|
13" x 33", "Modern", 220/3ph, S/N: 9323-6-49,
3 / 4 jaw chucks, Price: $3,150 USD Ref: 1662 SOLD |
|
12" x 32", "Colchester", geared head, dismantled, no chuck, spindle
out. steady rest,
no tailstock. rust is also free. Is this bed any good to you ?
Make any offer. Ref: N1025 |
|
12½" x 24", "Gornati", "Leopard" (Italy), equipped,
220V, 3hp, S/N:
131270A, equivalent to "Graziano"
quality, Price: $4,950 USD Ref: P0014 |
|
12½" x 24", "Gornati", "Leopard" (Italy), equipped,
220V, 3hp,
equivalent to "Graziano" quality, Price: $4,950 USD Ref:
P1209 SOLD |
|
6-1/4" x 32", "Magdeburg", automatic copy lathe, mod. DXKH-63 X 800, 1962,
12" 3-jaw
chuck, (6) spindle speeds (112-1800 RPM), 17.5 HP, tool holders, work drivers,
Price: Call |
|
12" x 30", "Elliott-ZMM" (Czech), 85-2000 RPM, 1.3" bore, 2 chucks, lots
of threads,
both inch/mm, splash guards, cabinet, coolant, Price: $2,980 USD
Ref: P0839 |
|
12" x 24", "Standard Modern", "Utilathe", 3 Jaw chuck, floor open cabinet
base, etc.
all-Geared head, w/great gear condition, good reputation, all parts available,
from school
$1,750 USD Ref: P0121 SOLD |
|
 11"
x 36", "TOS", "Zebrak", Price: $3,750 USD Ref:
P0004 |
|
 11"
x 33", "Technoimpex", 1969 Ref: 9182 SOLD |
|
 11"
x 32", "Summit" Ref:
9182 SOLD |
|
|
11" x 30", "TOS" (Czech), toolroom type, precision with collet
chucks, integrated thread dial, etc.
Price: $4,500 USD Ref:
P1208
|
|
11" x 27", Emco ", "Compact 10", combination lathe-mill,
115V, SN: 8708007, Price: $4,750 USD Ref:
1900 |
|
11" x 24", "Kerry", model 1124, 3 & 4 jaw chuck, steady rest, follower
rest, mm/in threads,
4-way toolpost, bottom cabinet base, 2HP/550V, SN:3081, Price $3,750 USD
Ref: P0089 |
|
 11"
x 24", "Standard Modern", Series 2000, SN: 6724, 1 HP, 220V/1ph Ref:
P0086 SOLD |
|
11" x 20", "Standard Modern", Series 2000, 1985±, S/N:
6460, 550V, metric,
3-4 jaw chucks, 4 way toolpost, 50-1500 rpm, 1hp., geared head, (gears
show almost no use), cabinet base, chuck, thread dial, and cuts threads
from 1½-92 tpi, Price: $2,950 USD Ref:
1691 ON RENTAL |
|
 10"
(Nominal), "Monarch", precision toolroom lathe, model: 10EE Ref:1655 |
|
9" x 36", "South Bend", rebuilt benchtop, 115V/230V, repainted, taper
attachment,6"-3 jaw chuck, 3/4" hole, 4 way toolpost, dial indicator,
Price: $1,675 USD Ref: 2337 |
|
8" x 18" (up to 22"), "Schaublin" (Swiss), mod. 102VM,
1.5 HP, loaded, Price: $6,500 USD Ref: P0088 |
|
8" x 18" (up to 22"), "Schaublin" (Swiss), mod. 102VM,
1.5 HP, loaded, Price: $6,500 USD Ref: P0227 |
|
 8"
x 16"±, "Boxford", model 125 TCL, CNC, toolpost, 220V,
Price: $5,500 USD Ref: P0159 |
| TURRET |
 29"
x 58", "Warner & Swasey", 4A, turret lathe, saddle type Ref:
9174 |
|
4"± bore, "Minganti", saddle type, automatic, w/bar feeder, 1975±,
some electrical problems, Price: $2,750 USD Ref:
2356 Picture
2 Picture 3 |
|
20" x 24", "Warner & Swasey", model 2A, saddle type, 575V, bore size
3.5", 3 jaw chuck,
4 way toolpost, 18" chuck, full disconnect, inch threading. Price: $7,500
USD Ref: 2123 SOLD |
|
16"± swing, "Gisholt",
mod. 5AR, ram type, w/2-jaw air chuck, for valves, etc., needs
work (mostly rusty, but whole machine for price of valve chuck). Price:
$1,500 USD Ref: C1544 |
|
| 11"
swing, 3/4" bore, "Brown & Sharpe" (B&S), model: no. 1F, collets,
Price: Call Ref:
C1578 |
|
6" x 24", "Schaublin", "Hydropneumatic", turret lathe, L-3000,
mod. 102HP,
SN:172404, 1.25 HP / 440V, air cut-off, hi-precision, Price: $5,650 USD Ref:
P0090 |
|
5.5" swing, "Herbert", no.0, 7/8" cap. spindle bore, 5800 RPM, large
quantity of collets,
ideal for lots of small parts. British top-quality, Price: $3,950 USD
Ref: C1536 |
|
34" in gap, "Gisholt" model: 2L, 4-1/8" spdl. bore, 20 HP, w/ 14" ID - 2-jaw
valve chuck, 220V/440V/3Ph, Price: $5,750 USD Ref:
C1538 SOLD |
|
Ram type, "Brown & Sharpe" (B&S), mod. 11,
reversing, 550V, Price: $1,250 USD Ref: N0892 |
| ACCESSORIES |
 14",
"May-Fran", chip wringer (spinner type) & chip conveyor Ref:
2218 |
| More
lathes available - Please CALL |
20"
x 72", "Monarch", Price: $9,800 USD
16"
x 60", "South Bend", 575V, S/N: 10653HKR14, Price: $2,975 USD
11"
x 36", "TOS", "Zebrak", Price: $3,750 USD
11"
x 24", "Standard Modern", Series 2000, SN: 6724, 1 HP, 220V/1ph
8"
x 16"±, "Boxford", model 125 TCL, CNC, toolpost, 220V,
Price: $5,500 USD
